Adjustment Of Throttle Lever; Adjustment Of Potentiometer - Sakai R2-4 Shop Manual

10. ADJUSTMENT OF THROTTLE LEVER

10-1. Adjustment of Potentiometer

• When the potentiometer is replaced, make an adjustment in
accordance with procedure described below.
• Make the adjustment after amply warming up engine.
• Oil temperature during measurement: 50
① Apply grease to shaft of potentiometer (1).
② Insert potentiometer shaft to the groove on shaft (3), and
fix it with two screws (2).
(NOTICE)
• When fixing potentiometer (1), turn potentiometer
clockwise till it is stopped by screws (2) and tighten
screws.
• Apply thread-locked liquid to screws (2).
°C (122 °F)
± 5 ± 9
INSPECTION AND ADJUSTMENT
A A
3 3
SECTION A-A SECTION A-A
2 2
VIEW B VIEW B
A A
R2-4-09018 R2-4-09018
1 1
B B
2 2
R2-4-09012 R2-4-09012
2 2
1 1
R2-4-09013 R2-4-09013
9-015