Table of Contents
Advertisement
EZ500 Diagnosis System
4.7. Special Functions
Different vehicle makes and models will have different special functions.
4.8. Actuation/Active Components Test
Test Conditions: Ignition on engine off.
If the engine is started or an engine rotation speed signal is received, component actuation will be
interrupted.
In the process of actuating components, a single component will always be in the trigger status until
the next component is activated.
Actuating components can be checked by hearing or touching.
4.8.1. Return to Dynamic Diagnostic Data, enter Test Actuator and it will show the menu of the
components that are available to actuate, shown below:
16
Advertisement
Table of Contents
