Philips Pathology Scanner SG20 Instructions For Use Manual page 78

Troubleshooting
16. If necessary, turn the right side
knob to pull back the sticking out
gripper as far as possible (I).
17. If necessary, remove the sticking
out slide from the gripper.
– Hold the slide and turn the front
– Remove the slide from the
18. Close the handler door (I).
19. Make sure the door is completely
closed.
CAUTION
Make sure nothing is blocking movement of the handler.
Note: if the previous scan job was not completely finished, slides can be present in the
gripper or on the stage.
78
side knob to release the slide
(I).
gripper (II).
I
II
I
Pathology Scanner SG20 / SG60 / SG300
Troubleshooting procedures
I