Philips Pathology Scanner SG20 Instructions For Use Manual page 55

Cleaning instructions
30. Clean the store area (I).
Use a lint free cloth, either dry or
damp.
NOTICE
To prevent errors, make sure to remove all cleaning materials and that all cleaned parts are
dry before closing the store door.
31. Proceed with Weekly cleaning or
do the following steps to finalize
cleaning.
32. Close the store door (I).
33. Use the power switch (I) on the
rear side of the scanner to start the
power supply.
34. Select the power button on the front.
35. Log in as an administrator user.
36. Start a manual calibration, see chapter "Manual calibration" on page 44.
Pathology Scanner SG20 / SG60 / SG300
I
I
I
Cleaning
55