Operating environment
Warning
(1) Do not use in an atmosphere containing
corrosive gases, chemicals, sea water,
water, water steam, or where there is direct
contact with any of these.
(2) Do not expose the product to direct
sunlight for an extended period of time.
(3) Do not mount the product in locations
where it is exposed to radiant heat.
Maintenance
Warnnig
(1) Do not disassemble the product or make
any modifications.
Do not disassemble the product or make any
modifications, including additional machining.
Doing so may cause human injury and/or an
accident
(2)Perform
maintenance
according to the procedures indicated in the
operation manual.
If handled improperly, malfunction or damage
of machinery and equipment may occur.
(3) Maintenance work
If handled improperly, compressed air can be
dangerous.
Assembly,
handling,
replacement of pneumatic systems should be
performed
by
experienced person.
(4) Drain flushing
Remove drainage from air filters regularly.
(5) Removal of equipment, and supply/exhaust
of compressed air.
Before components are removed, first confirm
that
measures
workpieces from dropping, run-away equipment,
etc. Then, Cut the supply pressure and electric
power, and exhaust all compressed air from the
system using the residual pressure release
function. When machinery is restarted, proceed
with caution after confirming that appropriate
measures are in place to prevent sudden
movement.
and
inspection
repair
and
a
knowledgeable
are
in place
to
element
and
prevent
- 10 -
Doc.no.DOC1018150
Need help?
Do you have a question about the DAS and is the answer not in the manual?