Residual Risks; Function Description - Hyundai 35701 Instruction Manual

INSTRUCTION
1.If fire comes from the engine or smoke appears from any area other than the exhaust vent, firs
distance yourself from the product to ensure your physical safety
2.If possible turn off the machine or disconnect power supply
3.Use dry powder fi re extinguisher or a shove to throw sand or other such material on the fi re to
prevent it from spreading
4.A panicked reaction could result in the fire and other damage becoming more extensive

RESIDUAL RISKS

1.Even if the device is used according to instructions it's impossible to eliminate all the risks as-
sociated with its operation The following risks may occur arising from device construction
2.Mechanical hazard caused by cut and throw off
3.Electrical hazard caused by touch with parts under high voltage(direct contact)or with part,
which came under a high voltage due to failure of the device(indirect contact)
4.Heat hazard resulting in burning or scalding and other injuries caused by possible contact with
high temperature objects or materials including heat sources
5.Noise risk resulting in loss of hearing(deafness)and other physiological disorders(e.g. loss of
Balance, loss of consciousness)
6.Vibration risk(resulting in vascular and neurological harm in the hand—arm system for example
so called "white finger disease")
7.Dangers caused by failing in ergonomic principles by construction of the machine, for example
dangers caused by unhealthy position of body or excessive overcharge and unnatural to the
anatomy of the human hand-arm, relate to construction of handle and equilibrium of the machine
Dangers caused by unexpected starting, unexpected exceeding of engine revs caused by defect/
failure of control system relate to the defects by the handle and placing of drivers.
8.Dangers caused by impossibility to stop the machine in best conditions relate to solidity of the
handle and placing of engine shut down device
9.Dangers caused by defect of machine control system, relate to solidity of the handle, placing of
drivers and marking.
10. Dangers caused by tearing (of the chain) during running.
11. Dangers caused by shooting up of subjects or splashing of liquids.

FUNCTION DESCRIPTION

Manually operated and portable electric grass trimmer driven by electro motor 230 V 50 Hz
As the cutting device it has a double sp001 with tap automatic and metal cutting blade, which
can be optionally installed. In the process of cutting, two synthetic Iines or knife with three blades
rotate around the axis vertically to the cutting plane To protect the use5 device is equipped with
safety guard which covers the cutting device Function of the service parts is described below
ASSEMBLY INSTRUCTION
Before performing any work on the device disconnect device from the power supply
Use only original parts and be care full when assembling line cutter Risk of injury!
Before operation, you must mount safety guard to the cutting device and two-part tube handles
Firstly, unpack the tool and make sure it is complete.
TWO-PIECE TUBULAR HANDLES ASSEMBLY(FIG 2)
ENGLISH
22