Table of Contents
Advertisement
cause possible injury, poor performance and may void
your warranty. You may make adjustments and repairs
described here. For other repairs, contact the
authorized service agent.
- Contact your dealer of manufacturer to know which
parts/accessories can be used with this tool.
- Before any maintenance or adjustment, stop the tool
and remove the battery.
- After extending new cutter line or cleaning, always
return the product to its normal operating position
before starting.
- After each use, clean the product with a soft dry cloth.
- Check all nuts, bolts and screws at frequent intervals
for proper tightness to ensure the product is in safe
working condition. Any part that is damaged should be
properly repaired or replaced by an authorized service
centre.
RESIDUAL RISK
Even when the product is used as prescribed, it is still
impossible to completely eliminate certain residual risk
factors. The following hazards may arise in use and the
operator should pay special attention to avoid the
following:
- Injury caused by vibration. Always use the right tool for
the job, use designated handles and restrict working
time and exposure.
- Exposure to noise can cause hearing injury. Wear ear
protection and limit exposure
- Kickback can occur when using the brushcutter. Ensure
proper control by using both hands on the designated
Safety
7
Advertisement
Table of Contents
