Hyundai 35701 Instruction Manual page 23

1.Push both parts of the tubular shaft together(hole in the top of the lower tubular shaft up)
You will hear a click (A)
2.Fold the protective plate(B)and tighten the screw cap to the right direction
3.Before each starting of the machine check, if the Lower tubular shaft firmly and securely
seated.
Before starting machine make sure that the Iower tube spindle firmly and securely fits and that
it is in the correct position
Disassembly
For removal the screw cap on the left side
Lift the protective plate pressing unlock the locking latch and slide the lower tubular shaft.
ASSEMBLY 0F HANDLE(PIC 3)
1.Loose the Allen screws on the handle
2.Into of handle grip on the upper tube insert the multifunctional handle and fasten it with a
bracket and 4 Allen screws(as shown)
3.Screw to tight
ASSEMBLY OF PROTECTIVE COVER (PIC.4)
Remove the Allen screws from the protective cover Replace the protective cover on the pipe
shaft Screw the socket head screws (A) as shown.
Instructions for Use
After reading the safety rules carefully. Follow the instructions below attentively in order to get the
most out of your grass trimmer.
Start off slowly, when you have gained experience. you will be able to use the grass trimmer to its
full potential.
INSTRUCTION
ENGLISH
23