Electrical Safety - Hyundai 35701 Instruction Manual

INSTRUCTION
use a electric tool while you are tired or under the influence of drugs, alcohol, or medication
A moment of inattention while operating electric tools may result in serious personal injury..
2.Use safety equipment Always wear eye protection Safety equipment such as a dust mask,
non-skid safety shoes, hard hat, or hearing protection used for appropriate conditions will reduce
personal injuries
3.Remove any adjusting key or wrench before turning the tool on A wrench or a key that is left
attached to a rotating part of the machine may result in personal injury.
4.Do not overreach Keep proper footing and balance at all times This enables better control of
the petrol tool in unexpected situations
5.Dress properly Do not wear loose clothing or jewelry Keep your hair, clothing and gloves away
from moving parts Loose clothes jewelery or long hair can be caught in moving parts

ELECTRICAL SAFETY

Caution! Do not touch the damaged cable and pull the mains plug when the cable is damaged
while working Damaged cables increase the risk of an electric shock If the power supply is dam-
aged, it must be immediately replaced with a cable without defect, to avoid dangerous situations
6.Do not expose this machine to the rain Do not use this machine in dampness and wet Keep
good lighting on the work place Do not use the machine in place, where is the danger of fire or
explosion
7.Protect yourself against the electric shock
8.Do not carry or manipulate the machine by service cabel, do not pull up the socket inlet from
the socket outlet by pulling the service cable Protect the service cable against heat, grease and
sharp edges
9.Pull up the socket inlet from the socket outlet before every adjustment, repair or maintenance
10.Check the service cabeI regularly and check if there are not marks of damage or ageing
11.If the service cabeI is damaged, Iet it have changed in accredited service to prevent the danger
12.Do not connect the damaged service cabeI into the supply and do not touch the damaged
cable before its disconnection of the supply The damaged service cable couId Iead to the contact
with lively parts
13.Work only in such place, which you can reach safely A11ways keep stationary position and
balance
14.Avoid unintentional startup Do not move the machine with your finger on the switch if it is con-
nected into the electricity
15.Use outdoor extension cords
16.Check the damaged parts Before the next using of the device it is necessary to survey the
damaged protection covers and other parts to judge, if the parts can continue to perform their duty
Check adjustment of moving parts and their movability, concentrate on cracks and broken parts,
fixation and other circumstances, which could threaten their duty Protection cover or another part
which is damaged, must be repaired or changed by accredited service. Defective switch must be
changed in accredited service
17.Do not use this machine if it is impossible to turn it On/Off by the switch
18.Do not use this machine if the service cable is damaged or mugged
19.This electric device is constructed in accordance with all valid safety regulations, which relate
to it All repairs must be made only by qualified persons and only original spare parts can be used
It can come to serious danger for the user in another case
ENGLISH
20