Table of Contents
Advertisement
TONE/PULSE
This telephone allows you to dial digits using the tone signaling mode or the old pulse
signaling mode.
1. Press MENU button.
2. Press DOWN button 6 times.
3. Press MENU button.
4. Press UP or DOWN button to select the dial signaling mode you desire.
5. Press MENU button to save the setting.
6. Press BACK button to go back to Standby mode.
AUTO ANSWER ON/OFF
This telephone allows you to enable or disable the handset to auto answer incoming call when
is picked up from cradle during ringing.
1. Press MENU button.
2. Press DOWN button 7 times.
3. Press MENU button.
4. Press UP or DOWN button to select the auto answer enable/disable option you desire.
5. Press MENU button to save the setting.
6. Press BACK button to go back to Standby mode.
EDIT USERNAME
This telephone allows you to input your username which to be displayed during Standby mode
and paging.
1. Press MENU button.
2. Press DOWN button 8 times.
3. Press MENU button.
4. Press numeric keypad to input multi-tap alphanumeric characters. (max. 15 characters).
5. Press MENU button to save the input.
6. Press BACK button to go back to Standby mode.
LOAD DEFAULT
This telephone allows you to restore the phone setup options back to factory default. The Load
Default action will cause Menu Language back to English, Ringer Volume back to Medium,
Ringer Tone back to Tone 1, Area Code erased, Tone/Pulse mode back to Tone, Auto Answer
back to Disable, ear piece volume back to Vol.1.
1. Press MENU button.
2. Press UP button.
3. Press MENU button.
4. Press UP button to select YES.
5. Press MENU button to confirm Load Default.
6. Press BACK button to go back to Standby mode.
TELEPHONE OPERATION
TO PLACE A CALL
1. Press the TALK button on the handset. The Call Timer starts to count. The base unit
LINE IN USE LED indicator will light up.
2. Listen for a dial tone.
3. Dial the telephone number. The phone numbers appear on the LCD Display as you enter
the number.
4. When finished with your call, press the TALK button or place the handset on the base
cradle. The handset LED will turn off, the base LINE IN USE LED indicator will turn on to
indicate charging.
NOTE: The call timer will start to count once you press the talk button. It will be shown up to 5
seconds after pressing TALK button.
13
05111A-1
Advertisement
Table of Contents
