Printing Cannot Be Performed Normally From Pc Or No Image Is Output - Sony UP-D898DC Service Manual

2-2-3. Printing cannot be performed normally from PC or no image is output

Printing cannot be performed
normally from PC or no image is
output.
Is the USB cable connecting this
unit and PC normal?
Yes
Does PC recognize this unit?
Yes
Is the printing performed normally
using the test page of printer
property on PC?
No
Go to next page.
UP-D898DC
FFC: Flexible flat cable
Check the connection of the USB
No
cable. If the symptom persists,
replace the USB cable.
Is the operation of each button on
No
the front panel normal?
The PC printer driver is defective.
Re-install the printer driver
(applicable to OS of PC) on PC.
Is the printing normally performed
Yes
after restarting PC and reinstalling
the printer driver (applicable to
OS of PC) on PC?
Replace the MA-201 board.
(Refer to Section 3-8.)
No
Yes
Yes
No
Check the solder of the USB-B
connector (CN701) on the MA-201
board. If the symptom persists,
replace the MA-201 board.
(Refer to Section 3-8.)
Normal
2-5 (E)