Table of Contents
Advertisement
1. Test Pattern Print
When you select the test pattern and press the menu lever, the printing is started.
The predetermined number of test pattern is printed by setting the number of print in "SV.QTY" in ad-
vance. When you want to discontinue the printing, press the [FEED] button and [OPEN] button on the
front portion of this unit.
Menu item
C.STP
N.STP
C.LMP
N.LMP
S.LMP
HD2
HD1
D.ADJ
*
00. (L/S)
*
3F. (L/S)
*
7F. (L/S)
*
BF. (L/S)
*
FF. (L/S)
* Print size: Horizontal x Vertical [mm]
100 x 75
S:
100 x 117
L:
2. Number of Test Pattern Print
Sets the number of test pattern (PATTERN) print.
SV.QTY:C
When setting to continuous print
SV.QTY:10
When setting to 10 sheets.
:
SV.QTY:1
When setting to 1 sheet.
When setting to continuous print, the test pattern is printed continuously.
When you want to discontinue the printing, press the [FEED] button or [OPEN] button on the front
portion of this unit.
UP-D898DC
Image pattern
Built-in cross step pattern
Built-in stair-step pattern
Built-in cross lamp image
Built-in lamp image
Built-in skew lamp image
Built-in thermal head confirmation pattern 2
Built-in thermal head confirmation pattern 1
Density adjustment print (not used in service)
Built-in 100% black pattern
Built-in gray pattern (darker)
Built-in gray pattern
Built-in gray pattern (lighter)
Built-in 100% white pattern
1-23 (E)
Advertisement
Table of Contents
