Sensor Location; Tightening Torque - Sony UP-D898DC Service Manual

1-3-3. Sensor Location

Paper front sensor
(Light receiving side)
Paper front sensor
(Light emitting side)

1-4. Tightening Torque

Tighten the following screws to the tightening torques as described below.
n
The screw (BVTT2.6 x 5) of this unit has two types of the tighten torque. Be careful not to confuse.
. B3 x 6:
. BVTT2.6 x 4:
. BVTT2.6 x 5 (for excluding paper holder): 0.80 ?0.05 N.m
. BVTT2.6 x 5 (for paper holder):
. P2.6 x 5:
. P3 x 4:
. PS3 x 6:
. PSW3 x 8:
. Newtru-star screw M2:
. Tapping screw M1.7:
When using the torque driver with the unit representation of cN.m, calculate the value as follows.
Example: 0.8 N.m = 80 cN.m
1-6 (E)
Head position sensor 1
Paper tray sensor Door sensor
(Light receiving side)
0.80 ?0.05 N.m
0.80 ?0.05 N.m
0.50 ?0.05 N.m
0.50 ?0.05 N.m
0.50 ?0.05 N.m
0.80 ?0.05 N.m
0.80 ?0.05 N.m
0.10 ?0.02 N.m
0.13 ?0.02 N.m
Head position sensor 0
Paper tray sensor
UP-D898DC