Table of Contents
Advertisement
3-8-4. Replacement Procedures of MA-201 Board
1. Perform "Procedure before replacement" by referring to Section 3-8-1.
2. Remove the cabinet. (Refer to Section 1-5.)
3. Remove the MD general assembly (DC). (Refer to Section 3-2.)
4. Remove the DC block assembly. (Refer to steps 3 and 4 in Section 3-6.)
5. Remove the screw (P3x4).
6. Remove the six screws (PSW3x8), then remove the MA-201 board.
PSW
3
8
MA-201 board
7. To install, reverse the removal procedure.
n
When installing the MA-201 board, attach the screw (P3 x 4) first.
3-14 (E)
P3
4
UP-D898DC
Advertisement
Table of Contents
