Table of Contents
Advertisement
Installation
6. Attach the cam assembly in the reverse order of steps 4 and 5.
n
When attaching the cam assembly, attach it so that the cams are facing the direction as shown in the
illustration.
7. Insert the portion A of the helical torsion spring (cam L) into the hole of chassis, then insert the
portion B into the hole of cam (L) while rotating it in the direction of the arrow.
Helical torsion spring (cam L)
Hole of cam (L)
Apply grease
Head up lever
8. Assemble this unit in the reverse order of steps 1 to 4.
n
When replacing the cam gear, cam (L) and cam (R), it is required to apply grease.
. Grease: 7-640-005-36 (SANKOL FG87HSR)
. Grease applying portion
When replacing the cam gear and cam (R): Head up lever
When replacing the cam (L):
UP-D898DC
Portion B
Portion A
Chassis of hole
Phase
Cam gear
Lock arm assembly
Apply grease
Lock arm assembly
Apply grease
Head up lever
Cam (L)
Cam (R)
3-29 (E)
Advertisement
Table of Contents
