1-3-3. Sensor Location
Head position sensor (Print)
Edge sensor
(Light receiving side)
Edge sensor
(Light emitting side)
Tray sensor
(Light receiving side)
1-4. Tightening torque
Tighten the following screws to the tightening torques as described below.
n
The screw (BVTT2.6 x 5) of this unit has two types of the tighten torque. Be careful not to confuse.
. B3 x 6:
. BVTT2.6 x 4:
. BVTT2.6 x 5 (for excluding paper holder): 0.80 ?0.05 N.m
. BVTT2.6 x 5 (for paper holder):
. P3 x 4:
. PS3 x 4:
. PS3 x 6:
. PS4 x 8:
. PSW3 x 8:
. LOCK ACE screw (M2):
. Tapping screw M1.7:
. N6, TYPE2:
When using the torque driver with the unit representation of cN.m, calculate the value as follows.
Example: 0.8 N.m = 80 cN.m
1-6 (E)
Head position sensor
(Home)
Tray sensor
(Light emitting side)
Door sensor
0.80 ?0.05 N.m
0.80 ?0.05 N.m
0.50 ?0.05 N.m
0.50 ?0.05 N.m
0.80 ?0.05 N.m
0.80 ?0.05 N.m
1.40 ?0.15 N.m
0.80 ?0.05 N.m
0.20 ?0.05 N.m
0.13 ?0.02 N.m
1.20 ?0.10 N.m
UP-D898MD/X898MD