Siemens SIMATIC ET 200SP Manual page 40

Additional information
You can find a detailed description of the counting and measurement functions and their
configuration in the following:
● Function manual Counting, Measurement and Position Detection available for download
on the Internet (http://support.automation.siemens.com/WW/view/en/59709820)
● Information system of STEP 7 (TIA Portal) under "Using technology functions > Counting,
measurement and position input > Counting, measurement and position input (S7-1500)"
Hardware Support Packages (HSP)
STEP 7 (TIA Portal)
If firmware version V2.0 of the module is not yet integrated in the TIA Portal version V15.1
you are using, you can integrate a corresponding module with HSP0300.
You can find the Hardware Support Packages (HSP) for download on the Internet
(https://support.industry.siemens.com/cs/ww/en/view/72341852).
You can also access this download from the menu bar of STEP 7 (TIA Portal): "Options >
Support packages > Download from the Internet".
STEP 7
You can find the Hardware Support Packages (HSP) for download on the Internet
(https://support.industry.siemens.com/cs/ww/en/view/23183356).
GSD file
You can find the respective GSD file for the ET 200SP distributed I/O system for download
on the Internet:
● GSD file for PROFINET IO
(http://support.automation.siemens.com/WW/view/en/57138621)
● GSD file for PROFIBUS DP
(http://support.automation.siemens.com/WW/view/en/73016883)
TM Count 1x24V (6ES7138‑6AA01‑0BA0) technology module
Manual, 07/2019, A5E33002339-AD
Configuring/address space
4.3 Manual operation (without technology object)
39