Configuring - Siemens SIMATIC ET 200SP Manual

Configuring/address space
4.3 Manual operation (without technology object)
4.3 Manual operation (without technology object)
4.3.1

Configuring

Introduction
You configure the technology module and assign its parameters with the configuration
software.
The functions of the technology module are controlled and checked by the user program via
the control and feedback interface.
System environment
The technology module can be used in the following system environments:
Applications Components required
Central operation
•
with a CPU 151xSP
•
Distributed operation
•
with an S7-1500 CPU
•
•
Distributed operation
•
with an S7-1200 CPU
•
•
Distributed operation
•
with an S7-300/400
CPU
•
•
Distributed operation
•
in a third-party sys-
•
tem
•
38
ET 200SP automation system
TM Count 1x24V
S7-1500 automation system
ET 200SP distributed I/O
system
TM Count 1x24V
S7-1200 automation system
ET 200SP distributed I/O
system
TM Count 1x24V
S7-300/400 automation sys-
tem
ET 200SP distributed I/O
system
TM Count 1x24V
Third-party automation system
ET 200SP distributed I/O
system
TM Count 1x24V
Configuration software
STEP 7 (TIA Portal):
Device configuration and parame-
ter setting with hardware configu-
ration
STEP 7 (TIA Portal):
Device configuration and parame-
ter setting with hardware configu-
ration
STEP 7 (TIA Portal):
Device configuration and parame-
ter setting with hardware configu-
ration
STEP 7 (TIA Portal):
Device configuration and parame-
ter setting with hardware configu-
ration
STEP 7:
Device configuration and parame-
ter setting with HSP
Third-party configuration soft-
ware:
Device configuration and parame-
ter setting with GSD file
TM Count 1x24V (6ES7138‑6AA01‑0BA0) technology module
In the user program
Direct access to control
and feedback interface in
the I/O data
Manual, 07/2019, A5E33002339-AD