Address Space; Control Interface And Feedback Interface; Assignment Of The Control Interface; Configuring - Siemens SIMATIC ET 200SP Manual

Configuring/address space
4.2 Position input for ""Motion Control"" technology object
4.2.3

Address space

Address space of the technology module
Table 4- 6
Range
4.2.4

Control interface and feedback interface

4.2.4.1

Assignment of the control interface

The control interface is reserved for Motion Control instructions.
4.2.4.2 Assignment of the feedback interface
The feedback interface is reserved for Motion Control instructions with the exception of
status information via the digital inputs.
Byte
offset
Bit 7
from
start
address
↓
0 Reserved
1...15 Reserved
36
Size of input and output addresses of the TM Count 1x24V with position input for "Motion
Control" technology object
Bit 6 Bit 5
Inputs
16 bytes
Bit 4 Bit 3
STS_DI0
TM Count 1x24V (6ES7138‑6AA01‑0BA0) technology module
Outputs
4 bytes
Bit 2 Bit 1
STS_DI1 Reserved
Manual, 07/2019, A5E33002339-AD
Bit 0
STS_DI2