Date And Time Menu; Networking Information Menus - Kohler 24RCLA Operation

3.16 Date and Time Menu

The date and time will typically be set at controller
power-up. To change the date, time, or time format
(12 hour or 24 hour), use the Date and Time menu.
See Figure 3-16.

3.17 Networking Information Menus

Use the networking menus to view and adjust
communication settings for systems with remote RBUS
devices such as a PIM or load management device, and
for systems that use the Kohlerr OnCuer Plus Home
Generator Management System. RBUS is a proprietary
RS-485 communication protocol.
The Networking Information menu leads to submenus
for network and RBUS communication settings. See
Figure 3-17.
Networking- - >
Information
Figure 3-17 Networking Information Menu
TP-6905 9/21
Networking- - >
Status
Networking- - >
Configuration
RBUS - - >
Information
<- - Return
Date and
Time
To change the date and time, press the Select button
See Figure 3-6 for instructions.
Figure 3-16 Date and Time Menu
NS
See Figure 3-18.
NC
See Figure 3-19.
RB
See Figure 3-20.
Section 3 RDC2 Controller Operation
Date:
02Dec2014
Time:
12:34pm
Time Format:
12hr|24hr
<- - Return
tp6810
tp6810
43