Date And Time Menu; Networking Information Menus - Kohler 14RCA Manual

3.17 Date and Time Menu

The date and time will typically be set at controller
power--up. To change the date, time, or time format
(12 hour or 24 hour), use the Date and Time menu.
See Figure 3-18.

3.18 Networking Information Menus

Use the networking menus to view and adjust
communication settings for systems with remote RBUS
devices such as a PIM or load shed kit, and for systems
that use the Kohler OnCuer Plus Generator
Management System.
RBUS is a proprietary RS-485 communications
protocol.
The Networking Information menu leads to submenus
for network and RBUS communication settings.
Networking---->
Information
Figure 3-19 Networking Information Menu
44 Section 3 RDC2 Controller Operation
Networking---->
Status
Networking---->
Configuration
RBUS ---->
Information
<---- Return
Date and
Time
To change the date and time, press the Select button
See Figure 3-7 for instructions.
Figure 3-18 Date and Time Menu
NS
See Figure 3-20.
NC
See Figure 3-21.
RB
See Figure 3-22.
Date:
02Dec2011
Time:
12:34pm
Time Format:
12hr|24hr
<---- Return
tp6804
tp6810
TP-7092 8/18