Genset Run Time Menu; Genset System Menu - Kohler 6VSG Operation Manual

3.13 Genset Run Time Menu

The data shown in Figure 24 are displayed. No changes are allowed from this menu.
The Next Maintenance menu shows the number of hours of generator set operation until maintenance is required. The estimated
date for the next scheduled maintenance is also displayed. The maintenance reminder intervals are based on the engine
manufacturer's recommendation for changing the oil. See the Scheduled Maintenance section, for maintenance instructions.
After changing the oil and performing other recommended maintenance, go to the Overview menu to reset the maintenance
timer. See the Resetting the Maintenance Timer section for instructions to reset the maintenance timer.
Figure 24 Generator Set Run Time Menu

3.14 Genset System Menu

The genset system menu displays the system information shown in Figure 25. Generator sets are factory-set and should not
require changes to the system settings in the field.
A Kohler-authorized distributor or dealer can adjust these settings, if necessary. If the generator set is reconnected to a different
voltage or the system settings require adjustment for some other reason, see the Changing Settings section for instructions to
enable editing and change the system settings.
Note:
Use caution when navigating the controller menus. In some menus, pressing the Select button can enable editing of the controller
settings. Changing the settings to incorrect values can adversely affect generator set operation or render the unit inoperable.
TP-6843 12/21
Eng Runtime:
Genset ---->
Run Time
Eng Starts:
Next Maintenance:
<---- Return
100.6 h
127
100 hours
39