Back Panel - Multitech MT64DSU Owner's Manual

MT64DSU Owner's Manual

Back Panel

The cable connections for the MultiDSU64K are made at the back
panel. The input data (DCE interface) is through either an RS-232 or
V.35 connection; and, theDDS network connection is through an
RJ48S line jack.
LINE
RS-232C Connector
The RS-232C connector is used to connect the MultiDSU64K to a
computer or DTE device.
V.35 Connector
The V.35 connector is used to connect the MultiDSU64K to a
computer or DTE device.
RJ48S Jack
The RJ48 line interface jack is used to connect the MultiDSU64K to
a DDS network.
Multi DSU Loopback Cable
The Multi DSU loopback cable is used to test mux internal
composite link DSU or external DSU.
Power Connector
The Power connector is used to connect the external power supply
to the unit.
On/Off Switch
The power switch provides DC power to the unit when placed in the
ON position and terminates power when placed in the OFF position.
10
Figure 1-4. Back Panel Connectors
EIA RS232C
ON
OFF
POWER