Multitech MT64DSU Owner's Manual page 49

Appendixes
Clear Number in Memory (CLA) Command
The CLA command clears a specific number in the nn phone
number memory location by entering CLA nn .
Dial Phone Number Stored in Memory (CRS) Command
A telephone number that is stored in the DSU's memory may be
automatically dialed. There are ten locations, 0 through 9. For
example, a number stored in nn location 8 would be entered by
dialing CRS8 and hitting RETURN.
Listing Numbers Stored in Memory (RLN) Command
Telephone numbers that you have stored in the DSU's V.25bis
memory may be listed and displayed with the RLN command. It will
display all ten nn storage location numbers and associated
telephone numbers with any command letters and punctuation
imbedded in each number. The RLN command is similar to the &Z?
command of the AT command set. To list the V.25bis stored
telephone numbers, enter RLN and hit RETURN.
Disregard or Connect to Incoming Calls (DIC or CIC)
Command
The Disregard or Connect to Incoming Calls commands are used for
Auto-Answer operations. Your DSU will wait some amount of time or
number of rings before answering the call. During that time, you can
stop the DSU from answering the call by entering the DIC (Disregard
Incoming Calls) command. The CIC (Connect to Incoming Calls)
command causes your DSU to answer the call (either reversing the
effect of a DIC command or simply have your DSU answer the call
immediately without waiting the regulation time before answering).
49