Spectra Stack Installation And Removal Manual page 6

Install the Shipping Bracket
2. Using a #1 Phillips screwdriver, remove the two screws that secure the
3. Move the drive bay cover to the slot 1 position at the bottom of the
4. Using a #1 Phillips screwdriver, install the two screws you removed in
5. Locate the shipping lock inside the library at the front of the chassis.
December 2022
slot 5 drive bay cover.
Figure 2 The rear of the Spectra Stack chassis.
library.
Step 2 to secure the cover to the chassis.
Figure 3 The shipping lock.
Shipping Bracket Installation & Removal — Spectra Stack Library
Ensure ESD Protection
6