Advertisement
Remove the Shipping Bracket
11. Replace the top cover.
December 2022
Note:
Replacing the top cover is only necessary if the Stack base
module is the top‐most chassis in the rack.
a. Position the cover over the opening in the chassis so that the tabs on
the sides of the cover align with the slots in the chassis.
Figure 16 The top cover.
b. Slide the cover towards the rear of the chassis until it locks in place.
Shipping Bracket Installation & Removal — Spectra Stack Library
Ensure ESD Protection
14
Advertisement
Need help?
Do you have a question about the Stack and is the answer not in the manual?
Questions and answers