Call Waiting Indication +Ccwa; Sms Status Report Indication Directly Displayed +Cds; Sms Status Report Indication Stored In Memory +Cdsi; Key Press Or Release +Ckev - Multitech MTCBA-C-IP-N12 Reference Manual

Call Waiting Indication +CCWA

This response indicates that another incoming call is occurring during an existing call. See +WFSH for
Description:
information about handling call-waiting situations
<caller_id> Caller identification number
Values:
<type>
Response syntax: +CCWA: <caller_id>, <type>
Syntax:
Example Result
+CCWA: 18005551212,129
Note: Incoming call from 1-800-555-1212, type always equals 129.

SMS Status Report Indication Directly Displayed +CDS

This response indicates an SMS status report has been received and according to the message storage
Description:
preferences (+CNMI), is to be directly displayed. +CDS is also used in the data compression functionality as
an active command. Refer to Chapter 16 (U
usage for data compression.
Values: <mr>
<ra>
<tora>
<scts>
<dt>
<st>
Response Syntax: +CDS: <mr>, [<ra>] , [<tora>], <scts>,<dt>,<st> (Text mode)
Syntax:
Example Result
+CDS : 2, 116, "3146290800", 129, "98/10/01,12 :30 :07+04", "98/10/01 12 :30 :08+04", 0
Note: SMS status report received

SMS Status Report Indication Stored in Memory +CDSI

This response indicates an SMS status report has been received and according to the message storage
Description:
preferences (+CNMI), is to be stored in
Values: <mem>
<index>
Response syntax: +CDSI: <mem>,<index>
Syntax:
Example Result
+CDSI: "SR",5
Note: SMS status report received and stored in "SR" memory at index 5

Key Press or Release +CKEV

This response indicates that a key has been pressed or released.
Description:
<key> Key input (0-9, *, #)
Values:
<press>
Response syntax: +CKEV: <key>,<press>
Syntax:
Example Result
+CKEV: 9,0
Note: Indicates key 9 has been released
Multi-Tech Systems, Inc. CDMA Wireless AT Commands (PN S000294J)
Always 129 for this response
Message Reference
Recipient Address
Type-of-Address of <ra>
Service Center Time Stamp in string format : "yy/MM/dd,hh :mm :ss±zz"
(Year/Month/Day,Hour:Min:Seconds±TimeZone)
Discharge Time in string format: "yy/MM/dd,hh :mm :ss±zz"
(Year [00-99], Month [01-12], Day [01-31], Hour, Minute, Second and Time Zone [quarters of
an hour] )
Status of a SMS-STATUS-REPORT (See Chapter 19)
NVRAM storage area (always "SR" for this response)
location of message within storage area
0: key release
1: key press
Chapter 21 – Unsolicited AT Result Codes
Interface Data Compression) for an explanation of +CDS
m
memory.
160