Return Profile Information $Qcmipgetp; Set Nai For Active Profile $Qcmipnai; Set Reverse Tunneling $Qcmiprt - Multitech MTCBA-C-IP-N12 Reference Manual

Return Profile Information $QCMIPGETP

This command is used to return all information corresponding to the specified profile number.
Description:
Values: <Val>
(0-5) Profile #
If no profile number is entered, all information corresponding to the currently active profile is returned. If
Note:
there is no profile associated with the specified number, an error is returned.
Command syntax: AT$QCMIPGETP=<Val>
Syntax:
Command
AT$QCMIPGETP?
Note: Display the current setting
AT$QCMIPGETP=?
Note: Display the range of values
AT$ CMIPGETP=0
Note: Set value to 0

Set NAI for Active Profile $QCMIPNAI

This command is used to set the network access identifier (NAI) for the currently active profile.
Description:
<String> The network access identifier text to be stored.
Values:
<Val>
Do not commit to NV
0
Commit to NV
1
Double quotes are only required if the string contains a command.
Note 1:
If the value provisioned is not committed to NV, the temporary value will be deleted at the end of the
Note 2:
following call if $QCMIPP is called.
Command syntax: AT$QCMIPNAI=<String>,<Val>
Syntax:
Command
AT$QCMIPNAI?
Note: Display the current setting
AT$QCMIPNAI=?
Note: Display the range of accepted character
values.
AT$QCMIPNAI=myName@myDomain.com,0
Note: Non-committed value set

Set Reverse Tunneling $QCMIPRT

This command is used to set the reverse tunneling currently active profile.
Description:
Values: <Val1>
Do not request reverse tunneling
0
Request reverse tunneling
1
<Val2>
Do not commit to NV
0
Commit to NV
1
f the value provisioned is not committed to NV, the temporary value will be deleted at the end of the
Note:
following call if $QCMIPP is called.
Command syntax: AT$QCMIPRT=<Val1>, <Val2>
Syntax:
Command
AT$QCMIPRT?
Note: Display the current setting
AT$QCMIPRT=?
Note: Display the range of values
AT$QCMIPRT=1,1
Note: Set value to 1 and commit
Multi-Tech Systems, Inc. CDMA Wireless AT Commands (PN S000294J)
Chapter 18 – Qualcomm Defined AT Commands for CDMA Operation
Possible Responses
ERROR
Note: Command is not valid
$QCMIPGETP: (0-5)
OK Note: Command is valid
Profile:0 Enabled
.....
OK Note: Command is valid
Possible Responses
User1@myprovider.com,1
OK
Note: Command is valid
$QCMIPNAI: (20,21,23-7E),(0-1)
OK
Note: ASCII hexadecimal character range supported
by this command. (All non-control codes.)
OK
Note: NAI is now: myName@MyDomain.com
Possible Responses
$QCMIPRT: 1,1
OK
$QCMIPRT: (0-1), (0-1)
OK
OK
Note: Command is valid
Note: Command is valid
Note: Command is valid
133