Removing And Replacing An Sff Power Switch Module - HP Enterprise ProLiant DL380 Gen10 Maintenance And Service Manual

Removing and replacing an SFF power switch module

Removing and replacing an SFF power switch module
Procedure Procedure
1. Power down the server (Power down the server).
2. Do one of the following:
Extend the server from the rack ( Extend the server from the rack ).
Remove the server from the rack ( Remove the server from the rack ).
3. Remove the access panel ( Remove the access panel ).
4. Disconnect cables from the power switch module.
5. Remove the power switch module.
To replace the component, reverse the removal procedure
Removing and replacing an SFF power switch module 173