Removing a hot-plug SAS/SATA basic drive
Removing a hot-plug SAS/SATA basic drive
CAUTION: For proper cooling, do not operate the server without the access panel, baffles, expansion slot covers, or
CAUTION:
blanks installed. If the server supports hot-plug components, minimize the amount of time the access panel is open.
1. Determine the status of the drive from the hot-plug drive LED definitions .
2. Back up all server data on the drive.
3. Remove the drive.
Figure 1: SFF drive
Figure 1: SFF drive
Figure 2: LFF drive
Figure 2: LFF drive
Removing a hot-plug SAS/SATA basic drive
118