7. Install the auxiliary card into an expansion slot. The auxiliary card must be installed in the secondary riser.
8. Install the 940QSFP56 x16 adapter into an expansion slot. The 940QSFP56 x16 adapter must be installed in the primary riser.
9. Install the retaining screw, if removed.
10. Install the riser cage.
11. Install the access panel.
12. Connect each power cord to the server.
13. Connect each power cord to the power source.
14. Power up the server.
Removing and replacing a 940QSFP56 x16 adapter and auxiliary card
144