Removing And Replacing The Flexiblelom - HP Enterprise ProLiant DL380 Gen10 Maintenance And Service Manual

Removing and replacing the FlexibleLOM

Removing and replacing the FlexibleLOM
Procedure Procedure
1. Power down the server (Power down the server).
2. Remove all power:
a. Disconnect each power cord from the power source.
b. Disconnect each power cord from the server.
3. Disconnect the LAN segment cables.
4. Do one of the following:
Extend the server from the rack ( Extend the server from the rack ).
Remove the server from the rack ( Remove the server from the rack ).
5. Remove the FlexibleLOM.
To replace the component, reverse the removal procedure.
Removing and replacing the FlexibleLOM 153