HP Enterprise ProLiant DL380 Gen10 Maintenance And Service Manual page 228

LEDs."
**If the health LED indicates a degraded or critical state, review the system IML or use iLO to review the system health status.
†Facility power is not present, power cord is not attached, no power supplies are installed, power supply failure has occurred, or the
power button cable is disconnected.
LFF 12-drive model front panel LEDs and button LFF 12-drive model front panel LEDs and button
Item Item Description Description
1 Health LED*
2 Power On/Standby button
and system power LED*
3 NIC status LED*
Status Status
Solid green = Normal
Flashing green (1 Hz/cycle per sec) = iLO is
rebooting
Flashing amber = System degraded
Flashing red (1 Hz/cycle per sec) = System critical**
Solid green = System on
Flashing green (1 Hz/cycle per sec) = Performing
power on sequence
Solid amber = System in standby
Off = No power present†
Solid green = Link to network
Flashing green (1 Hz/cycle per sec) = Network
active
Off = No network activity
Front panel LEDs and buttons 228