Removing And Replacing The 8 Sff Drive Cage - HP Enterprise ProLiant DL380 Gen10 Maintenance And Service Manual

Removing and replacing the 8 SFF drive cage

Removing and replacing the 8 SFF drive cage
Procedure Procedure
1. Power down the server (Power down the server).
2. Remove all power:
a. Disconnect each power cord from the power source.
b. Disconnect each power cord from the server.
3. Do one of the following:
Extend the server from the rack ( Extend the server from the rack ).
Remove the server from the rack ( Remove the server from the rack ).
4. Remove the access panel ( Remove the access panel ).
5. Remove all drives ( Removing and replacing drives ).
6. Remove the fan cage (Removing and replacing the fan cage ).
7. Disconnect all cables from the drive backplane.
8. Remove the drive cage.
To replace the component, reverse the removal procedure.
Removing and replacing the 8 SFF drive cage 159