To Position The Library; Figure 2-11 Removing The Ramp Extensions - Sun Microsystems StorEdge L11000 User Manual

Table of Contents

Advertisement

FIGURE 2-11
14. Replace the wooden bar.
Re-insert the right-side wooden bar into its brackets on the pallet to hold the library
in place.

To Position the Library

Caution – The library weighs approximately 1300 pounds (591 kg). Use two or
more individuals when rolling the library into position, especially if the library has
to be moved over a carpeted area or up or down a ramp.
1. Map out a route to the installation site.
Verify the floor clearance, strength, and inclination information found on page 13.
2. Remove the shipping bag.
Carefully lift the shipping bag off of the library as shown in FIGURE 2-12.
28
Sun StorEdge L11000 User's Guide • September 1998
Removing the Ramp Extensions

Advertisement

Table of Contents
loading

Table of Contents