4100/4120 INSTALLATION MANUAL
1.
CARD TROUBLES
If the LCD displays ...
m
1st Line Shows Card Expected at this Address.
Reprogram System or Insert Proper Daughter Card.
If the LCD displays ... Extra Card Abnormal
m
A Daughter Card is/was installed but not Programmed.
Reprogram System or Remove Extra Daughter Card.
Warm Start is Necessary to Clear this Trouble Condition. Press the CPU
Reset Switch located on the Master Controller Board.
Document No: 4100-M002
APPENDIX B
4100 Fault Messages
Wrong Card Abnormal
35
Issue 1.0