Section 1 - Receiving; Preliminary Inspection; Visible Loss Or Damage; Responsibility For Shipping Damage - Thermo Scientific 2032 Operating And Maintenance Manual

Forma plasma thawing bath
Table of Contents

Advertisement

Model 2032 and 2036 Baths ______________________________________________________________Receiving / Features

Section 1 - Receiving

1.1 Preliminary Inspection

This item was thoroughly inspected and carefully packed
prior to shipment and all necessary precautions were taken to
ensure safe arrival. Immediately upon receipt, before the unit is
moved from the receiving area, carefully examine the shipment
for loss or damage. Unpack the shipment and inspect both inte-
rior and exterior for any in-transit damage.

1.2 Visible Loss or Damage

If any loss or damage is discovered, note any discrepancies
on the delivery receipt and call the delivering carrier and
request that their representative perform an inspection. Do not
discard any of the packing material and do not move the ship-
ment from the receiving area.

1.3 Responsibility for Shipping Damage

For products shipped F.O.B. Marietta, Ohio, the responsi-
bility of Thermo Scientific ends when the merchandise is
loaded onto the carrier's vehicle.
On F.O.B. Destination shipments, Thermo and the carrier's
responsibility ends when your Receiving Department personnel
sign a free and clear delivery receipt.
Whenever possible, Thermo will assist in settling claims
for loss or in-transit damage.

Section 2 - Features

2.1 Features

The Model 2032 Thawing Bath is designed to thaw from
1 to 8 plasma units in 25 minutes, or 4 red cell units in about 12
minutes.
The bath temperature can be set at 37°C with a fixed set-
point switch, or it can be dialed to any desired temperature
between 5°C above ambient to 60°C. The temperature control
maintains the bath temperature to within ±0.1°C of setpoint.

2.2 Accessories

Plasma Rack/Cover:
Holds 8 standard size plasma boxes
Red Cell Canister Rack
Plasma Thawing Rack
Plasma Thawing Rack:
Holds 12 wedge-shaped plasma boxes
Plasma Rack/Cover Kit:
Includes 185055 rack, Gable pedestal
and hinged lid.
Holds 12 wedge-shaped plasma boxes.
Thermometer
2 - 1
#185057
#185004
#185048
#185055
#185054
#942030

Advertisement

Table of Contents
loading

This manual is also suitable for:

2036

Table of Contents