Installation; Receiving Inspection; Unpacking - Thermo Scientific Centra-W Cell Washer Service Manual

2.1

Receiving Inspection

2.2

Unpacking

Centra-W Cell Washer Service Manual
The Cell Washer is shipped in a special carton designed to protect it from
hazards in transit. Before signing the delivery receipt and accepting the
shipment, inspect the shipping carton for any signs of mishandling, such as
broken or dented sides or SHOCKWATCH® activation. Any observed
damage must be stated, in writing, on the delivery receipt before signing the
receipt. A normal or undamaged carton does not necessarily ensure that the
contents are undamaged. If mishandling or shipping damage is suspected,
contact the office of the carrier so that a representative may be called in to
witness the unpacking. IEC is not responsible for damage incurred in transit.
CAUTION: The Cell Washer weighs 45 lbs. (20.4 kg). Unpacking
and installation may require two people. Do not use any
sharp instrument to open the inner carton packaging,
damage to the instrument may result.
Note: Refer to Figure 2-1 while unpacking.
1. Remove the small box containing the rotor (Figure 2-1).
2. Remove the Power Cords and fuses.
3. Remove the top cardboard supports.
4. Remove the cardboard protector from the Cell Washer.
5. Grip the cell washer under the top edge of the front panel and
under the top edge of the pump enclosure and lift it free of the
carton. (Have someone hold the carton, if necessary).
6. Place the cell washer on a sturdy, level bench near a waste
container or drain to receive decanted saline.

2 INSTALLATION

5