Table of Contents
Advertisement
1. Once in the settings menu, press "DRINK SETTINGS". The
values for the first beverage appear on the display;
2. The values are displayed on vertical bars. The default value
is indicated by the
highlighted by the solid part of the vertical bar;
3. To go back to the settings menu, press
scroll and display the beverages, press
4. To reset the default values for the beverage displayed,
press
;
5. "CONFIRM RESET?": to confirm, press
cancel, press
6. "VALORI FABBRICA""IMPOSTATI": press
The beverage has been reset to the default values. Proceed with
the other beverages or go back to the homepage by pressing
twice.
6.7 Auto-off (standby)
Auto-off can be set so that the appliance goes off after 15 or 30
minutes, or 1, 2 or 3 hours.
To programme Auto-off, proceed as follows:
1. Press "AUTO-OFF";
2. Select the required time interval by pressing the selection
arrows
(increase) or
3. To confirm, press
Auto-off is now programmed.
6.8
Energy saving
Use this function to enable or disable energy saving. When en-
abled, the function reduces energy consumption in compliance
with European regulations.
To disable or enable "Energy Saving", proceed as follows:
1. Press "ENERGY SAVING" to disable (
) the function;
The corresponding symbol (B1) appears on the top bar of the
homepage to indicate that the function has been enabled.
Please note:
If energy saving is active, you may have to wait a few seconds
before delivery.
6.9 Coffee temperature
To change the temperature of the water used to make the cof-
fee, proceed as follows:
"COFFEE TEMPERATURE"
1. Press
appear on the display (B1) (the current value is underlined);
2. Press the value you want to set (LOW, MEDIUM, HIGH).
Please note:
Varying the temperature has most effect for long beverages.
symbol, while the current value is
);
(decrease);
.
) or enable (
. The selectable values
6.10 Water hardness
For instructions on setting water hardness, see section "14.
Setting water hardness".
6.11 Set language
To modify the language of the display, proceed as follows:
. To
"
1. Press
SET LANGUAGE";
;
2. Press the flag corresponding to the language you want
to set (press
available).
(to
6.12 Beep
This enables or disables the beep emitted by the machine each
.
time an icon is pressed or an accessory is inserted/removed. To
disable or enable the beep, proceed as follows:
1. Press "BEEP" to disable (
function;
6.13 Bluetooth
This function enables or disables the protection PIN to connect
to the appliance from a device.
1. Press "BLUETOOTH". The serial number of the machine (19
digits) and a 4 digit number (PIN) appear on the display (B1);
2. Press (
the PIN when you connect via the App;
During connection operations, the PIN required to connect to
the App appears on the display.
The PIN can be personalised directly from the App.
Please note!
The serial number of the appliance, visible in the "Bluetooth"
function, enables it to be identified unambiguously when an
association is created with the APP.
6.14 Default values
This resets all menu settings and programmed quantities for
all profiles back to the default values (with the exception of the
language which remains as set).
To reset the default values, proceed as follows:
1. Press "DEFAULT VALUES". "DEFAULT VALUES" is displayed.
Press
cancel the operation);
2. "DEFAULT VALUES SET": press
6.15 Statistics
This displays statistics relating to the machine. To view the sta-
tistics, proceed as follows:
1. Press "STATISTICS" and check all the statistics by scrolling
through the items using
8
to display all the languages
) or enable (
) to enable or (
) to disable the request for
to confirm (or press
.
H
) the
to
to confirm.
Advertisement
Table of Contents
Troubleshooting
