Table of Contents
Advertisement
Please note!
•
The first time you use the appliance, you need to make 4
- 5 cappuccinos before it starts to give satisfactory results.
•
When making the first 4 - 5 cappuccinos, it is normal to
hear the noise of boiling water. After this, the noise be-
comes less.
•
To improve the performance of your appliance, we recom-
mend installing a water softener filter (D7) as described
in section "15. nWater softener filter". If your model is not
provided with a filter, you can request one from De'Longhi
Customer Services.
4.
TURNING THE APPLIANCE ON
Please note!
•
Before turning the appliance on, make sure the main
switch (A22) is pressed (fig. 2).
•
Each time the appliance is turned on, it performs an auto-
matic preheat and rinse cycle which cannot be interrupted.
The appliance is ready for use only after completion of this
cycle.
1. To turn the appliance on, press the
(fig. 8);
2. When at temperature, the appliance performs a rinse cycle
delivering hot water from the coffee spouts. As well as
heating the boiler, this also heats the internal circuits by
circulating hot water.
The appliance is ready for use when the main screen (home-
page) appears.
5. TURNING THE APPLIANCE OFF
Whenever the coffee machine is turned off after being used to
make coffee, it performs an automatic rinse cycle (fig. 9)
1. To turn the appliance off, press the
(fig. 8).
2. The appliance performs a rinse cycle then goes off
(stand-by).
Please note!
If you will not be using the appliance for some time, unplug
from the mains socket:
1. First turn the appliance off by pressing the
2. Release the main switch (A22) at the back of the appliance
Important!
Never press the main switch while the appliance is on.
6.
6.1 Access the settings menu
1. Press the "
2. Scroll through the menu items by pressing
3. Press the menu item you want to select.
6.2 Exit the menu
When you have made the adjustments, press
until you are back on the homepage.
button (A15)
6.3
Use this function to deliver hot water from the coffee spouts
(A9) and hot water spout (D6), if inserted, to clean and heat the
appliance's internal circuit.
1. Place a container with a minimum capacity of 100ml under
2. A few seconds after the "RINSING" item has been selected,
3. To stop rinsing, press
Please note!
•
•
6.4 Descaling
For instructions on descaling, see section "13.
6.5 Water filter
9
.
For instructions on how to install the filter (D7), see section "15.
nWater softener filter".
button (A15)
6.6 Beverages settings
In this section, you can consult your customised settings and, if
you wish, reset the default values for each beverage.
7
(fig. 8);
(fig. 2).
MENU SETTINGS
" button (C3) to enter the menu;
until the required items is displayed;
Rinse
the coffee and hot water spouts (fig. 8).
hot water is delivered first from the coffee spouts and then
from the hot water spout (if inserted) which cleans and
heats the appliance's internal circuit (fig. 7).
stop automatically.
If the appliance is not used for more than 3-4 days, when
you turn it on again, we strongly recommend performing
2/3 rinses before use;
After cleaning, it is normal for the grounds container (A11)
to contain water.
button
or wait for rinsing to
A
Descaling".
Advertisement
Table of Contents
Troubleshooting
