DeLonghi DINAMICA PLUS ECAM37 85 Series Instructions For Use Manual page 23

DISPLAYED MESSAGE
TURN MILK FROTH
ADJUSTMENT DIAL TO CLEAN
POSITION
CLEAN
TURN FROTH ADJUSTMENT
DIAL
DESCALING NEEDED
PRESS OK TO START
(~45MIN)
REPLACE WATER FILTER
PRESS OK TO START
GENERAL ALARM: CONSULT
USER MANUAL/APP
POSSIBLE CAUSE
Milk has been delivered recently and the tubes
inside the milk container (E) must be cleaned.
The milk container has been inserted with
the froth adjustment dial (E1) in the CLEAN
position.
The machine must be descaled.
The water softener filter (D7) is exhausted.
The inside of the appliance is very dirty.
The tubes inside the milk container (E) must be
cleaned.
REMEDY
Turn the froth adjustment dial (E1) to CLEAN
(fig. 19).
Turn the dial to the required froth position.
Press the selector corresponding to "OK" to
start descaling or "ESC" to descale later. The
descaling procedure described in section "13.
Descaling" needs to be performed.
Press the selector corresponding to "OK" to re-
place or remove the filter, or "ESC" to carry out
the procedure later. Follow the instructions in
section "15. Water softener filter".
Clean the inside of the appliance thoroughly,
as described in section "12. Cleaning". If the
message is still displayed after cleaning, con-
tact a customer service centre.
Turn the froth adjustment dial (E1) to CLEAN
(fig. 19).
23
→