Table of Contents
Advertisement
9.3 Making cappuccinos and milk-based coffees
automatically
1. Fill the milk container (E) and attach it as described above.
2. Select the required beverage:
• CAPPUCCINO
• LATTE MACCHIATO
• HOT MILK
• CAPPUCCINO+
• CAPPUCCINO MIX
• CAFFELATTE
• FLAT WHITE
• ESPRESSO MACCHIATO
3. A message on the display instructs you to turn the froth
adjustment dial (E1) according to the froth required by the
original recipe. Turn the dial on the milk container lid.
4. After a few seconds, preparation begins automatically and
an image of the selected beverage appears on the display,
together with a progress bar which gradually fills as prepa-
ration progresses.
Once the coffee has been made, the appliance is ready to make
the next beverage.
Please note: general indications when preparing all milk-
based beverages
•
: press to interrupt preparation completely
and go back to the homepage.
•
: press to interrupt milk or coffee delivery and
move on to the next delivery (if applicable) to complete the
beverage.
•
Preparation of each coffee can be customised (see section
"11. Customising the beverages").
•
Do not leave the milk container out of the refrigerator for
long periods. The warmer the milk (5°C is ideal), the poorer
the quality of froth produced.
9.4
Cleaning the milk container after use
Each time you use a milk function, "TURN MILK FROTH ADJUST-
MENT DIAL" "TO CLEAN POSITION" appears on the display and
the milk frother lid must be cleaned:
1. Leave the milk container (E) in the machine (you do not
need to empty it);
2. Place a cup or other recipient under the frothed milk spout;
3. Turn the froth adjustment dial (E1) to "CLEAN" (fig. 19).
"CLEANING UNDERWAY" "RECIPIENT UNDER SPOUT" ap-
pears on the display together with a bar which gradually
fills as cleaning progresses (fig. 20). Steam mixed with hot
water comes out of the frothed milk spout. Cleaning stops
automatically;
4. Turn the dial back to one of the froth selections;
5. Remove the milk container and always clean the hot
water connection nozzle (A8) with a sponge (fig. 21).
Please note!
•
To prepare a number of cappuccinos and milk based cof-
fees, clean the milk container after you have prepared
the last beverage only. To proceed with making the next
beverages, when the CLEAN message is displayed, press
.
•
If you do not clean the milk container, the
pears on the display to remind you that it needs cleaning.
•
The milk container can be kept in the refrigerator.
•
In some cases, to clean you must wait for the appliance
to heat up.
10.
DELIVERING HOT WATER
1. Make sure the hot water spout (D6) is attached correctly to
the hot water connection nozzle(A8);
2. Place a container under the spout (as close as possible to
avoid splashes);
3. Press "HOT WATER"; The corresponding image appears on
the display, together with a progress bar which fills grad-
ually as preparation proceeds;
12
19
21
symbol ap-
20
Advertisement
Table of Contents
Troubleshooting
