Table of Contents
Advertisement
2. Access the menu as described in section "6.1 Access the
settings menu";
3. PRESS "WATER FILTER";
4. Press the selector corresponding to " REMOVE WATER
FILTER";
5. "CONFIRM FILTER REMOVAL": press
press
6. "FILTER REMOVED": the change has been saved. Press
to go back to the homepage.
Please note!
After two months (see date indicator) or when the appliance has
not been used for 3 weeks, you should replace the filter even if
the message has not yet been displayed.
16. TECHNICAL DATA
Voltage:
220-240 V~ 50-60 Hz max. 10 A
Power:
Pressure:
Water tank capacity:
Size LxDxH:
Cord length:
Weight:
Beans container capacity:
Frequency:
Maximum transmission power
17.
DISPLAYED MESSAGES
DISPLAYED MESSAGE
FILL TANK WITH FRESH
WATER
INSERT WATER TANK
to go back to the settings menu);
1450 W
1.9 MPa (19 bars)
1.8 l
240x440x360 mm
1750 mm
10 kg
300 g
2400/2483.5 MHz
10 mW
POSSIBLE CAUSE
Insufficient water in the tank (A17).
The tank (A17) is not correctly in place.
16.1 Tips for Energy Saving
•
Do not attach the accessories to the steam connection noz-
zle (A8) until needed for the beverage to be made. After
delivery, remove the accessory. (After delivering bever-
ages with milk, always clean the milk container (E) before
removing);
(or
•
Set auto-off to 15 minutes (see paragraph "6.7 Auto-off
(standby)
•
Enable Energy Saving (see paragraph "6.8 Energy saving
");
•
When requested by the machine, perform the descaling
cycle.
REMEDY
Fill the tank with water and/or insert it correct-
ly, pushing it as far as it will go until it clicks
into place.
Insert the tank correctly and press as far as it
will go.
19
"):
→
Advertisement
Table of Contents
Troubleshooting
