Making Cappuccinos And Milk-Based Coffees; Filling And Attaching The Milk Container; Adjusting The Amount Of Froth; Making Cappuccinos And Milk-Based Coffees Automatically - DeLonghi PrimaDonna Elite Experience Manual

Table of Contents

Advertisement

10. MAKING CAPPUCCINOS AND MILK-BASED
COFFEES
Please note!
To avoid milk with poor froth or large bubbles, always clean the
milk container lid (D2) and hot water connection nozzle (A9) as
described in sections "10.4 Cleaning the milk container after
use", "18.10 Cleaning the milk container" and "18.11 Cleaning
the hot water/steam connection nozzle".

10.1 Filling and attaching the milk container

1. Remove the lid (D2) (fig. 15);
15
2. Fill the milk container (D3) with a sufficient quantity of
milk, not exceeding the MAX level marked on the contain-
er (fig. 16). Each mark on the side of the container corre-
sponds to about 100 ml of milk;
Please note!
For a denser more even froth, you must use skimmed or
partially skimmed milk at refrigerator temperature (about
5°C).
If "Energy Saving" mode is enabled, you may have to wait a
few seconds before the beverage is delivered.
17
3. Make sure the milk intake tube (D4) is correctly inserted in
the bottom of the milk container lid (fig. 17);
4. Place the lid back on the milk container;
5. If present, extract the hot water/steam spout (C6) by press-
ing the release button (C7) (fig. 18);
6. Attach the milk container (D) to the connection nozzle (A9)
(fig. 19) and push as far as it will go. The machine emits a
beep (if the beep function is enabled);
7. Place a sufficiently large cup under the coffee spouts (A8)
and frothed milk spout (D5). Adjust the length of the milk
spout. To move it nearer the cup, simply pull it downwards
(fig. 20).
8. Follow the instructions below for each function.
16

10.2 Adjusting the amount of froth

Turn the froth adjustment dial (D1) to adjust the amount of froth
on the milk delivered while making cappuccinos and milk-based
coffees.
Dial
position

10.3 Making cappuccinos and milk-based coffees

automatically
1. Fill the milk container (D) and attach it as described above.
2. Select the required beverage from the homepage:
• CAPPUCCINO
18
• LATTE MACCHIATO
• CAFFELATTE
• HOT MILK
• CAPPUCCINO+
15
19
Description
Recommended for...
NO FROTH
HOT MILK (not frothed) /
CAFFELATTE
MIN. FROTH
LATTE MACCHIATO /
FLAT WHITE
MAX. FROTH
CAPPUCCINO / CAPPUCCI-
NO+ / CAPPUCCINO MIX
/ ESPRESSO MACCHIATO /
HOT MILK (frothed)
• ESPRESSO MACCHIATO
• FLAT WHITE
• CAPPUCCINO MIX
20

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ecam656.85.ms

Table of Contents