Mercedes-Benz S-Class Saloon W223 2021 Owner's Manual page 408

406 Wheels and tyres
* NOTE Vehicle damage from the jack
If you do not position the jack correctly at the
appropriate jack support point of the vehicle,
the jack could tip over with the vehicle raised.
The jack is designed exclusively for jack-
#
ing up the vehicle at the jack support
points.
Take the ratchet ring spanner out of the tyre-
#
change tool kit and place it on the hexagon
nut of the jack so that the letters "AUF" are
visible.
2
Position support of jack
#
port point 1.
Turn ratchet ring spanner 3
#
jack support 2 sits completely on jack sup-
port point 1 and the base of the jack lies
evenly on the ground.
P223 0288 02
Continue to turn ratchet ring spanner
#
the tyre is raised a maximum of 3 cm off the
ground.
Loosen and remove the wheel (
#
Removing a wheel
Requirements:
The vehicle is raised.
R
When changing a wheel, avoid applying any force
to the brake discs, as this could impair the level of
comfort when braking.
* NOTE Damage to threading from dirt on
wheel bolts
4
on jack sup-
Do not place wheel bolts in sand or on a
#
dirty surface.
clockwise until
Unscrew the uppermost wheel bolt com-
#
pletely.
3 until
page 406).
/