Mercedes-Benz S-Class Saloon W223 2021 Owner's Manual page 391

Wait to load until transport level has been
#
reached and the Transport level
shown.
%
If the vehicle is raised to transport level, the
transport settings will continue to be shown
even after a restart. Operation of the driver
display is meanwhile restricted.
When the vehicle is at transport level, it is lowered
again in the following situations:
When driven faster than 40 km/h.
R
The 12 V battery is discharged.
R
The vehicle is adjusted to the height of the last
active level.
Transporting the vehicle
status is
Load the vehicle onto the transporter.
#
Shift the automatic transmission to position
#
j.
Use the electric parking brake to secure the
#
vehicle against rolling away.
Switch off the engine and the power supply.
#
Only secure the vehicle by the wheels.
#
4MATIC vehicles
Make sure that the front and rear axles come
#
to rest on the same transportation vehicle.
P223 0288 02
Breakdown assistance 389
* NOTE Damage to the drive train due to
incorrect positioning of the vehicle
Do not position the vehicle above the
#
connection point of the transport vehi-
cle.
Unloading the vehicle
Make sure that the vehicle is raised to trans-
#
port level before unloading (
Lowering the vehicle after unloading
Switch on the power supply.
#
Start the engine.
#
Swipe upward in the transport settings to
#
select Standard level and press a.
The vehicle is set to the height of the last
active level and the Vehicle lowering
message is shown.
After the vehicle has been lowered, press the
#
G button for at least two seconds.
The transport settings are closed.
page 387).
/
display