Mercedes-Benz S-Class Saloon W223 2021 Owner's Manual page 127

ments placed on the seats e.g. seat cushions
or child seats. This could cause damage to the
seat surface.
Make sure that no objects or documents
#
are on the seats when the seat heater is
switched on.
Requirements:
The power supply is switched on.
R
Press button 1 repeatedly until the desired
#
heating level is set.
Depending on the heating level, up to three
indicator lamps will light up. If all indicator
lamps are off, the seat heating is switched off.
%
The seat heating will automatically switch
down from the three heating levels after 8, 10
and 20 minutes until the seat heating
switches off.
P223 0288 02
Seats and stowing 125
% If you switch the power supply off and on
again within 20 minutes, the previous setting
of the seat heating for the driver's seat will
remain active.
%
You can set the heat distribution of the heated
sections among the seat cushions and seat
backrests on the front and rear seats using
the multimedia system (
/
%
Vehicles with the Warmth Comfort Package:
you can adjust the heating of the centre con-
sole and door armrests using the multimedia
system ( page 125).
/
Setting the panel heating
Multimedia system:
© Comfort Seat
4 5 5
Heating settings Panel heating
5 5
When the seat heating is switched on, the armr-
ests, the centre panels of the doors and the
centre console can be heated.
Switch the function for the desired seats on or
#
off.
page 122).