Mercedes-Benz S-Class Saloon W223 2021 Owner's Manual page 405

On vehicles with the same front and rear wheel
size, you can interchange the wheels every
5000 to 10,000 km, depending on the wear.
Ensure the direction of rotation is maintained for
the wheels.
Observe the instructions and safety notes on
"Changing a wheel" when doing so (
Notes on storing wheels
When storing wheels, observe the following notes:
After removing wheels, store them in a cool,
R
dry and preferably dark place.
Protect the tyres from contact with oil, grease
R
or fuel.
Overview of the tyre-change tool kit
* NOTE Plug-in hybrid
Observe the notes in the Supplement.
#
You could otherwise fail to recognise
dangers.
Apart from some country-specific variants, vehi-
cles are not equipped with a tyre-change tool kit.
For more information on which tyre-changing
tools are required and approved for performing a
wheel change on your vehicle, consult a qualified
specialist workshop.
page 403). Required tyre-changing tools may include, for
/
example:
Jack
R
Chock
R
Wheel wrench
R
%
The jack weighs approximately 3.4 kg.
The maximum load capacity of the jack can
be found on the sticker affixed to the jack.
The jack is maintenance-free. If there is a
malfunction, please contact a qualified spe-
cialist workshop.
The tyre-change tool kit is located in tool bag
on the boot floor.
1
P223 0288 02
Wheels and tyres 403
The tool bag contains:
Jack
R
Gloves
R
Wheel wrench
R
Centring pin
R
Folding chock
R
Ratchet for jack
R
Preparing the vehicle for a wheel change
Requirements:
The vehicle is not on a slope.
R