Mercedes-Benz S-Class Saloon W223 2021 Owner's Manual page 302

300 Driver display
System limits
The marker of the detected vehicle in front may
be inaccurate or may not be applied to the cor-
rect vehicle in some situations. Always pay atten-
tion to the actual driving situation.
Route guidance with augmented reality is not
available in some situations, e.g. in the event of
poor satellite reception or roads that have not
been digitised.
Visibility is influenced by the following conditions:
Driver camera and multifunction camera
R
recording
The extent to which the windscreen in the
R
area of the multifunction camera is dirty, or if
the camera is misted up, damaged or
obscured.
Further system limits of the head-up display
( page 298).
/
Operating the head-up display
Selecting display content of the head-up display
via the menu bar of the driver display
Press the main menu button ò on the left.
#
To select the menu bar of the head-up dis-
#
play: swipe upwards on the left-hand Touch
Control.
Switching between display contents on the head-
up display
Swipe right or left on the left-hand Touch Con-
#
trol.
The head-up display shows a preview of the
selected display contents after each swipe.
P223 0288 02
Press the a button to confirm the desired
#
content.
Switching back to the driver display
Press the G or ò button.
#
Setting the position and brightness
On the menu bar of the head-up display,
#
select Settings by swiping to the left or right.
Press the left-hand Touch Control.
#
The current position and brightness settings
will be displayed graphically on the head-up
display as well as on the driver display.
To adjust the position: swipe upwards or
#
downwards on the left-hand Touch Control.
To adjust the brightness: swipe to the right or
#
left on the left-hand Touch Control.
The settings configured for position and
brightness will be saved automatically.
Press the G or a button to exit the set-
#
tings.