Mercedes-Benz S-Class Saloon W223 2021 Owner's Manual page 121

the head and neck area, e.g. in the event of an
accident or sudden braking.
Before driving off, make sure for every
#
vehicle occupant that the centre of the
head restraint supports the back of the
head at about eye level.
Adjust the head restraint fore-and-aft position so
that it is as close as possible to the back of your
head.
To move forwards: pull the head restraint for-
#
wards.
To move backwards: press release knob
#
and push the head restraint backwards.
▌Attaching and removing the additional cushion
of the front-seat luxury head restraint
Position head restraint
#
possible.
To attach the additional cushion: open Velcro
#
strip 4 on the rear of additional cushion 1.
Guide Velcro strip
#
1
2 and strip 3.
P223 0288 02
2 as far forwards as
4
between head restraint
Seats and stowing 119
Close Velcro strip 4.
#
Change the position of the additional cushion:
#
move additional cushion 1
To remove additional cushion: open Velcro
#
strip 4 of additional cushion 1.
Remove additional cushion 1.
#
▌Lowering and positioning the rear seat head
restraints electrically from the front compartment
Multimedia system:
© ß y
4 5 5
Tap on ü.
#
The outer head restraints will lower.
Tap on ü again.
#
The outer head restraints will move into the
last stored position.
up or down.